… These forms of calculation used to be carried out by hand, but in recent years, with modern software, the process has been computerised. What is swept path analysis?Ī Swept Path Analysis is the calculation and analysis of the movement and path of different parts of a vehicle when that vehicle is undertaking a turning manoeuvre. Follow the remaining onscreen prompts to complete the installation process. You will be presented with a screen to confirm the existing installation location. Browse to the Workstation folder and run the file SetupWorkstation.exe.
#AUTOTURN CIVIL 3D INSTALL#
How do I install AutoTURN?īrowse to the AutoTURN Pro 10 shared folder on the network server. Setting up AutoTURN – Before a path can be laid out, there are a number of settings that should be made. Commands Used: CDOT Menu > Tools >AutoTURN – Used to launch the AutoTURN program. Once MicroStation is running, AutoTurn can be launched.
#AUTOTURN CIVIL 3D DOWNLOAD#
Select “Vehicle Tracking” and download and install the version appropriate for your Civil 3D. Expand “Architecture Engineering & Construction Collection” and select “View items” button.Ĥ. Make sure that the cursor is not on a vehicle, then right-click New Vehicle, or click the Vehicle Wizard button. The swept path is generated and the path redrawn.2. Change any other settings if necessary and then click OK.These are typically Pilot's Eye or Front most Axle. If you are modelling aircraft then you should click on the Tracking Point tab and check that the Tracking Points are set correctly.If you want to adjust the position of the vehicle then select Manual. Otherwise, you will probably want Start Position set to Automatic, which will start the vehicle at the end of the line closest to the point you picked, with the steered wheels tangential to the line and all the spines aligned. If you have a path pre-selected then the current vehicle position and orientation will be used.Select Automatic to determine the direction of travel based upon the orientation of the vehicle relative to the starting vertex of the polyline. Select Keep Current to continue in the current direction (if this maneuver follows one performed using a different drive mode). Select Forward or Reverse to force the direction of travel. Make sure that the Start Direction is set correctly.Closing segments of closed polylines are ignored. The vehicle follows the line starting at the end closest to the point picked. Pick an AutoCAD polyline (which may be 2D, 3D, splined, curve-fitted or contain straight and/or arc segments) or spline (2D, non-closed, non-periodic splines only) or MicroStation complex chain.
#AUTOTURN CIVIL 3D HOW TO#
For help on how to select a vehicle, see To Select a Vehicle to Drive.
If you want to use a different vehicle, see To Change your Selected Vehicle. If you have a default vehicle set up, then Follow will use this vehicle.Select Follow from the Autodesk Vehicle Tracking menu or click the Follow button on the Vehicle Tracking toolbar.It can be used in conjunction with the other drive modes. It is useful if the path that your vehicle will take is well defined, such as an aircraft maneuvering on an airport taxiway.
Follow allows you to track a vehicle along a predefined polyline or spline.
0 kommentar(er)
